3D Project Process: 02

                              

Design- GOLEM

Plan

——————————————

CONTINUING- PROCESS 01

 After attaching the string, I arranged the cardboard on which I will be making my bottom sole

Next, I made the outline for the sole which I will be cutting with paper cutter and scissor.

Here is a video of mine displaying the cut out of the cardboard how it would look when I will attach it.

As I was sticking a big piece of cardboard with hot glue gun, It was difficult to stick all together. So I attached it by cutting it into 3 parts.

——————————

Next with help of hot glue gun I sticked the big red rope.

This is how it came out to look from which I was slightly disappointed as the cardboard was ruining the entire looks of the slide so to hide it I planned to add a medium size rope on top of it so it hides the mistake and look much better.

 For the medium sided rope I planned to utilize the stock big rope which I had by untangling it.

The untangle rope came out to look much better as it hide the messy cardboard with the untidy glues behind.

Here is the outcome how it looks when I painted the medium rope in the same color.

———————-

Next I painted out the back of the sole in red and additional made a cutout of cardboard for the Tyre design. Although it is not as same as the actual Tyre marks which I created in the 2d design but as a prototype the design which I planned will works out well for my work.

Here is the process shot of me making the bottom sole Tyre sole from cardboard.

By stacking 3 block making it one I made it total 8 times and designed it accordingly using all purpose glue.

Next I started painting it with a big brush and red acrylic.

Here is the finish sole of my work which turned out to be very good and moreover I am satisfied with my work because it has nice imprints of tyre.

——————

However I wasn’t satisfied with the top and carbon fiber as there were mistakes witch made my work look untidy.

Here is what I did to fix my final prototype -

- I added a small rope running on the head toe.

- I added new carbon fiber tape to hide the dirty rope and extended a bit.

- I smudged the edges with the body color .

- I fixed all the mistakes of paint and the filled with gaps in the paint.